Krystal Gabert, Editor
After years of advice, prodding, urging and incentivizing,
manufacturers are greener than ever, and so are their
When I was a child, my brother and I would play a little game, flip- ping on light switches and counting the minutes until my dad turned them off. He told us that someday we’d pay the electric bill
and he’d have the last laugh, watching us pad around turning out lights just
like he had.
Much like my dad, American manufacturers are acutely aware of the cost of energy and of the
enormous savings that smart energy consumption can generate. According to statistics from the U.S.
Energy Information Administration (EIA), the average retail price of electricity for industrial customers
has risen steadily from 5.05 cents per kilowatt-hour in 2001 to 6.82 cents per kilowatt-hour in 2011.
While this increase closely mirrors the rate of inflation, manufacturers have been proactive in adopting
energy efficient equipment and procedures in order to reduce energy-related expenses.
And they’ve had some help. The California Energy Commission identifies the following eight “best
practices” in energy consumption in manufacturing:
• Increase the Efficiency of Motors and Systems
• Improve Building Lighting
• Upgrade Heating, Ventilating and Cooling
• Capture the Benefits of Utility Competition
• Empower Your Employees To Do More
• Use Water Reduction Practices
• Use the Internet
• Implement Comprehensive Facility Energy and Environmental Management
ENERGY STAR, a joint effort by the U.S. Environmental Protection Agency and the U.S. Department
of Energy, echoes many of these directives in its own advice on “energy efficiency opportunities,” urg-
ing manufacturers to:
• Measure and track energy performance.
• Improve common plant systems such as motors, compressed air, steam, process heating, etc.
• Turn off what is not required.
• Get employees involved.
• Check the lights.
By utilizing these and other methods, the U.S. manufacturing sector has managed to decrease
total energy consumption by 17 percent between 2002 and 2010, according to a report released last
month by the EIA. The EIA breaks energy into two segments: fuel (energy used to power a facility) and
feedstock (input that becomes final product). According to the report, the food manufacturing sector
was one of two manufacturing industry segments (along with petroleum/coal) that increased fuel energy consumption by 3. 5 percent. However, during the period covered in the EIA report, the food manufacturing sector increased output by five percent, meaning less total energy was spent per finished unit
in 2010 than was in 2002.
The EIA found that along with a 5 percent increase in finished goods, the food industry cut 115,000
jobs over the eight-year period covered by the report. This data shows that food manufacturing companies are now turning fewer man hours and less energy into more food products.
Like all stories of its kind, mine ends this way: my dad was right. I now diligently turn out every light
before I leave the room and make sure all the gaps around the windows are sealed up tight before winter
hits. But new technology and energy improvements have allowed me to enhance my family’s heirloom
thriftiness, ensuring that my window air conditioner is ENERGY STAR-rated, the automatic thermostat is
set to 66 degrees while I’m at work, and all my light bulbs have been replaced with CFLs and LEDs.
Manufacturers, too, have found that diligence is key in reducing energy costs, but embracing new
technologies will take them to the next level. ◆
TOM LYNCH • 973-920-7782; Fax 973-607-5492
JEFF REINKE • 973-920-7784; Fax: 973-607-5605
KRYSTAL GABERT • 973-920-7020; Fax: 973-607-5459
LINDSEY JAHN • 973-920-7795; Fax: 973-607-5503
SUSAN FRANK • 973-920-7158; Fax: 973-920-7541
KAREN MULRENAN • 973-920-7141
RYAN CONGDON • 973-920-7764
Web Production Specialist
MARCELLUS SCHOOLER • 973-920-7025
Customer Service Supervisor
ALYSSA ADAIR • 973-920-7789
GAIL KIRBERGER • 973-920-7482; Fax: 973-267-7542
List Rentals/Account Executive
Jen Felling - Postal/Telemarketing • 203-778-8700, ext.138
Turk Hassan - Email Lists • 203-778-8700, ext. 144
The YGS Group
ABMReprints@the YGSGroup.com • 800-501-9571, ext.100
3650 West Market Street • York, PA 17404
ANDY JUAREZ, Engineering Manager, Tree Top Inc.
MIKE SCHMID, Managing Partner, Wolfgang Candy Co.
STEVE VAN TASSEL, CEO, Weetabix North America
CRAIG SHIESLEY, General Manager of Silk, White Wave Foods
National Sales Manager
100 Enterprise Drive, Suite 600, Box 912
Rockaway, NJ 07866-0912
973-920-7194; Fax: 973-920-7542
National Sales Manager
199 East Badger Road, Suite 101 • Madison, WI 53713
973-920-7774; Fax: 973-607-5460
100 Enterprise Drive, Suite 600 • Rockaway, NJ 07866-0912
973-920-7000; Fax: 973-920-7531
Chief Executive Officer
Vice President, Finance/Treasurer
Vice President, Human Resources