The most trusted name in Stainless Steel Conveyors
Since 1974, Kamflex has engineered and manufactured quality
stainless steel sanitary conveyors. Our engineering response
time is the best in the industry and our quality has no equal.
Contact Kamflex the next time you need a stainless steel conveyor.
Let us make it easy for you.
1321 West 119th Street, Chicago, Illinois 60643-5109 Tel. 1• 800 • 323 • 2440
Variable Speed Metering
The IVSP Industrial Variable Speed Metering Pump
is ideal for viscous fluids. It has a rugged 1/4 HP
variable speed drive motor and available with san-
itary quick-disconnect fittings. Speed is controlled via
a DIN mountable controller for both manual and electronic
speed control. The valveless function is accomplished by the
synchronous rotation and reciprocation of the ceramic piston within a
precisely mated ceramic liner. The reciprocation action of the piston, similar
to a standard piston pump, accomplishes the pumping function. However,
that’s where the similarity ends. The piston also rotates, alternately aligning
a flat at the end with the inlet and outlet ports of the pump. When the flat is aligned with the
inlet port, fluid can be drawn into the pump. When the flat is aligned with the outlet port, fluid
can exit the pump. Only one port is open at any time and at no point are both ports intercon-
nected. This effectively functions as, and replaces, conventional check valves.
Fluid Metering Inc. www.fluidmetering.com
Bulk Bag Discharging System
System provides a sealed discharge of granular
sugar into customer's existing process. Unit features a sanitary design with no tube penetrations
for ease of equipment sanitation. A Seal-Master™
spout access chamber and Sure-Seal™ bag spout
clamping system ensure dust-tight operation. Unit
features a Flo-Lock™ discharge gate for partial
bag discharging, and a Flo-Master™ bulk bag
massaging system to provide positive material
flow. Lower frame section is 304 stainless steel,
while upper frame sections are carbon steel,
painted FDA white. Square tubes are rotated 45°,
and round tubes are utilized to help facilitate
cleaning of equipment during wash down. All p
roduct contact surfaces are 304 stainless steel.
Material Transfer www.materialtransfer.com
Fume hoods are constructed entirely of chemical resistant, flame retardant, non-metallic composite resin
materials & features an exclusive “Unitized” construction
that does not require screws, bolts, rivets, or metallic
hardware to assemble. The fume chamber is molded one
piece seamless with all corners coved for easy cleaning
& light reflectivity. This series of fume hoods is UL 1805
certified and is offered in 48”, 60”, 72” and 96” widths
in either constant air volume or restricted bypass models.
The high performance fume hood maximizes user protection and energy savings. Hood is shipped completely assembled and can include a wide selection of accessories
to meet customer needs. Work surfaces in a variety of
materials and a choice of base cabinets including acid or
flammable storage are optional as required.
Hemco Corporation www.hemcocorp.com